Industry News_news_Jiangyin Nanzha Special Tape Co., Ltd.

08-19 

How to Use TLC Silica Plates for Best Results

Thin-layer chromatography silica gel plate, high-efficiency thin-layer chromatography silica gel plate, which is made of high-quality thin-layer chromatography silica gel with appropriate adhesive and spread on glass substrate, with specified pore volume, specific surface and pore distribution . The plate is made of high-purity thin-layer chromatography silica gel (powder) mixed with a certain amount of binder and sprayed. The surface of the plate is pure white, flat, uniform and fine. The main component is SiO2·nH2O, which has stable chemical properties and does not react with other acids and bases except for strong alkali and alkali. Thin-layer chromatography silica gel plates can be directly used for qualitative or quantitative analysis of various types of organic substances.

08-13 

The use and classification of thin layer chromatography silica gel plate

Thin-layer chromatography silica gel plate is made of high-purity thin-layer chromatography silica gel (powder) mixed with a certain amount of binder and sprayed. The surface of the plate is pure white, flat, uniform and fine.

08-13 

The use and classification of thin layer chromatography silica gel plate

Thin-layer chromatography silica gel plate is made of high-purity thin-layer chromatography silica gel (powder) mixed with a certain amount of binder and sprayed. The surface of the plate is pure white, flat, uniform and fine. The main component is SiO2·nH2O, which has stable chemical properties and does not react with other acids and bases except strong bases. Thin-layer chromatography silica gel plates can be directly used for qualitative or quantitative analysis of various types of organic substances.

08-06 

The difference between nylon film base belt and ordinary film base belt

Nylon sheet-based transmission belts are flat high-speed transmission belts. Usually, there is a nylon sheet base in the middle of the base belt, and the surface is covered with rubber, cowhide, and fiber cloth; it is divided into rubber nylon sheet base belts and cowhide nylon sheet base belts. Belt thickness is usually in the range of 0.8-6mm. The material structure of the nylon base belt is innovative and unique. Compared with the traditional canvas transmission belt and V-belt, it has the advantages of strong tensile force, flexural resistance, high efficiency, low noise, fatigue resistance, good wear resistance and long service life. Ordinary film carrier belts can be used in

07-31 

The difference between anti-static silicone plate and conductive silicone plate

Generally, silicone products are required to have properties such as insulation and conductivity, so how to distinguish conductive silicone and anti-static silicone? The surface resistance value of anti-static silica gel board products reaches the 12th power of 10 or more, which is the insulation level. (There must be many people who think: 10 to the 5th power is considered conductive, 5 to 9th power is anti-static, and more than 9th power is insulation.) Conductive silicone rubber usually refers to the 9th ohm cm with a volume resistance of 10 within. Conductive rubber is divided into anti-static grade conductive rubber

07-24 

How to use anti-static silicone plate

In the factory, in the dry seasons of autumn and winter, some static electricity will be generated, which is a great safety hazard for the production work of the factory, because it will cause some accidents and damage to the workers, so how to avoid these. People have created an anti-static silicone sheet, which can effectively reduce the generation of static electricity, so how to use this product?