How to use anti-static silicone plate

Categories:Industry News
Author:
Origin:
Time of issue:2020-07-24
Views:0

(Summary description)In the factory, in the dry seasons of autumn and winter, some static electricity will be generated, which is a great safety hazard for the production work of the factory, because it will cause some accidents and damage to the workers, so how to avoid these. People have created an anti-static silicone sheet, which can effectively reduce the generation of static electricity, so how to use this product?

防静电硅胶板的使用方法





How to use anti-static silicone plate

(Summary description)In the factory, in the dry seasons of autumn and winter, some static electricity will be generated, which is a great safety hazard for the production work of the factory, because it will cause some accidents and damage to the workers, so how to avoid these. People have created an anti-static silicone sheet, which can effectively reduce the generation of static electricity, so how to use this product?

Categories:Industry News
Author:
Origin:
Time of issue:2020-07-24
Views:0

In the factory, in the dry seasons of autumn and winter, some static electricity will be generated, which is a great safety hazard for the production work of the factory, because it will cause some accidents and damage to the workers, so how to avoid these. People have created an anti-static silicone sheet, which can effectively reduce the generation of static electricity, so how to use this product?

The basic ground can be lubricated cement floor, terrazzo floor, tile floor, and wooden floor. The following conditions must be met when using anti-static silicone sheets. The ground must be flat, without significant unevenness, and the unevenness should be less than two thousandths.

The ground must be strong enough and dry, without sanding and shelling.

Construction procedures and specific methods of anti-static silicone plate:

First of all, the ground should be cleaned. The thickness of the copper strips used for laying the grounding conductive mesh on the ground is 0.02mm and the width is 20mm. -3m strip), and at the same time lead one end of the copper strip to the outdoor grounding pole of the earth.

After the grounding conductive mesh is laid, put the anti-static rubber sheets on the ground in turn. If the gap between the anti-static rubber sheets is too large, you can cut them straight with a knife to make the gap smaller. Flip the edge of the laid anti-static rubber sheet on the table mat (about 20cm), apply glue in the middle of the gap, let the glue dry for 20-30 minutes, stop when the hand does not stick, and then glue the anti-static silicone sheet to the ground, Then roll the board several times at noon to make the paste more firm. Visually, the surface of the static-conducting rubber board can be neat and straight. Finally, it can be used after being placed at room temperature for 48 hours.

Keyword:

Scan the QR code to read on your phone

Previous: The difference between anti-static silicone plate and conductive silicone plate

Next: None

Previous: The difference between anti-static silicone plate and conductive silicone plate

Next: None

How to use anti-static silicone plate

防静电硅胶板的使用方法

How to use anti-static silicone plate

0510-86181860